Corrosion & Scale Inhibitor for Cooling Water System
KURIZET S-663A
Corrosion & Scale Inhibitor for Cooling Water System
Description: KURIZET S-663A is a corrosion and scale inhibitor for open recirculating cooling water system. This new corrosion and scale inhibitor incorporates an advanced polymeric formulation, besides helping in the inhibition of the scaling in the cooling water system, but also has excellent dispersing effect against suspended solids; keeping the heat exchangers’ surfaces clean.
Properties:
Main Ingredient : Phosphate, zinc and advanced polymer
pH (20oC) : < 2.0
Appearance : Colorless to yellowish liquid
Specific Gravity : 1.20 ~ 1.28
Features:
• Excellent corrosion inhibition effect.
• Excellent scale inhibition effect against calcium and zinc phosphates, calcium carbonate and so on.
• Excellent dispersing effect against suspended solids, especially against ferric hydroxide.
• Liquid type for ease of handling
Application:
1. For initial treatment to form the initial passivation film, please consult our Technical Representative for recommendation.
2. For maintenance treatment, it is recommended to maintain KURIZET S663A at 40 ~ 100 mg/l in the cooling water at all times. The chemical should be injected into the cooling water system with a metering pump.
3. For optimum application, kindly seek the advice of KURITA representative.
4. Application of suitable slime control agents together with KURIZET S-663A is recommended to prevent slime troubles.
Handling & Storage:
• Avoid direct contact with eyes and skin. Wear protective face shield and rubber gloves
• In case of direct contact, flush affected area with plenty of water thoroughly. Seek medical attention if irritation at affected area persists.
• Store the chemical indoor, from freezing and extreme heat. Keep container closed when not in use.
• Do not use empty container for drinking water supply
• Please refer to Material Safety Data Sheet for more details.
Packaging:
Standard packaging
