KURITA F-4210

Halogen based oxidizing microbiocide for Water Systems

Description

KURITA F-4210 is an oxidizing microbiocide for water systems like open recirculating cooling water system, municipal and swimming pool.

Features

· Free from injection unit (tablet form)

· Outstanding germicidal effect on micro- organism.

· Rapid kill rate on most micro-organism.

· Comes in granules form which dissolved easily. Therefore, no chemical feed pump is necessary

Application

1. Dissolved KURITA F-4210 before dosing directly into water systems.

2. Maintain residual halogen concentration at 0.5 – 1.0 mg/l (ppm) as Cl2 for at least 2 hours per day.

3. For disinfection of cooling tower, maintain residual halogen at 5.0 ppm as Cl2 for 2 to 4 hours.

Properties

Handling And Storage

KURITA F-4210 is a strong oxidizing agent, so proper precautions should be taken in storing and handling.

· Keep away from fire, heat, acid, grease, oil, rags, sulfur, or other flammables, and be sure not to allow direct contact. Wetting of KURITA F-4210 can cause rapid decomposition and flashing.

· In transportation or storage, be careful not to damage the container.

· Store KURITA F-4210 in a cool, dry place and the container should be carefully closed to prevent entry of moisture.

· When spilled, flash KURITA F-4210 with a large volume of water.

· Avoid direct contact of a KURITA F-4210 with the skin, eyes, mouth, or nose. In the event it touches the exposed skin, immediately wash the affected area thoroughly with clean water.

· Refer to the product’s Safety Data Sheet for more information.